Profiles (Left section)
Service range
| Standard material | |||
| Material codes | Pressure MPa {kgf/㎠} | Max. speed (m/s) |
Temperature
range (℃) |
| PEFE (PT165) | - | 3 | ー30～100 |
Characteristics
SMD-Wipers provide excellent operating property (non stick-slip) even under poor lubricating conditions.
SMD-Wipers scrape adhered firmly caked mad or adfreezing (ice) on the rod surfaces away.
SMD-Wipers scrape adhered firmly caked mad or adfreezing (ice) on the rod surfaces away.
Remarks
- ●Wipers should be installed in the direction specified on the above schematic.
- ●Consider adopting split grooves if one-piece groove is technically adverse.
- ●For applications with rod diameter φ30 and smaller sizes, the structure of the split grooves is recommended for the smooth installation.
- ●Refer to the ℓ dimension as it would be differed according to the type of packings to be used together.
- ●For ℓ(L) dimensions when using the dust seal alone, please refer to the SKY dimensions.
- ※JIS standard sequence of surface roughness symbols refer to HERE.
Dimension table
| Wipers & Groove dimensions（Unit：mm） | Part No. | |||||
|---|---|---|---|---|---|---|
| d | D | H | G | C | B | Standard(PT165) |
| 8 | 12.8 | 3.5 | 3.7 | 9.5 | 2 | SMD-8 |
| 10 | 14.8 | 3.5 | 3.7 | 11.5 | 2 | SMD-10 |
| 12 | 18.8 | 4.7 | 5 | 13.5 | 2 | SMD-12 |
| 14 | 20.8 | 4.7 | 5 | 15.5 | 2 | SMD-14 |
| 16 | 22.8 | 4.7 | 5 | 17.5 | 2 | SMD-16 |
| 18 | 24.8 | 4.7 | 5 | 19.5 | 2 | SMD-18 |
| 20 | 26.8 | 4.7 | 5 | 21.5 | 2 | SMD-20 |
| 22 | 28.8 | 4.7 | 5 | 23.5 | 2 | SMD-22 |
| 25 | 31.8 | 4.7 | 5 | 26.5 | 2 | SMD-25 |
| 28 | 34.8 | 4.7 | 5 | 29.5 | 2 | SMD-28 |
| 36 | 42.8 | 4.7 | 5 | 37.5 | 2 | SMD-36 |
| 40 | 46.8 | 4.7 | 5 | 41.5 | 2 | SMD-40 |
| 45 | 51.8 | 4.7 | 5 | 46.5 | 2 | SMD-45 |
| 50 | 56.8 | 4.7 | 5 | 51.5 | 2 | SMD-50 |
| 56 | 62.8 | 4.7 | 5 | 57.5 | 2 | SMD-56 |
| 63 | 69.8 | 4.7 | 5 | 64.5 | 2 | SMD-63 |
| 65 | 71.8 | 4.7 | 5 | 66.5 | 2 | SMD-65 |
| 70 | 78.8 | 6 | 6.3 | 71.5 | 3 | SMD-70 |
| 80 | 88.8 | 6 | 6.3 | 81.5 | 3 | SMD-80 |
| 90 | 98.8 | 6 | 6.3 | 91.5 | 3 | SMD-90 |
| 100 | 108.8 | 6 | 6.3 | 101.5 | 3 | SMD-100 |
| 125 | 133.8 | 6 | 6.3 | 126.5 | 3 | SMD-125 |
| 140 | 148.8 | 6 | 6.3 | 141.5 | 3 | SMD-140 |
- ★Orders and inquiries are acceptable by part numbers. Part numbers marked ※ have been changed each part numbers. Please check HERE for the previous part number.
- ★Part numbers in blue letters are the products in stock. Products of custom dimensions and shapes are available upon request.
- ★Wipers with the part numbers in light Italic require the confirmation of their availability prior to ordering. These items are subject to the abolishment without notice. Reclamation of an abolished product requires producing the new tooling at your expense.
- ★Wipers are adequately packaged for the optimum storage. Refer to Cautions for the handling and storage.
- ★Performance and material tests on packing and seals are also available. Please contact us for more information.
| Profiles (Left section) | Standard Material | Part Name | Application | Field of application |
|---|---|---|---|---|
 |
PTFE(PT154) | SMJ-Seals | （Rod packings） |
Technical information
TECHNICAL INFORMATION