Profiles (Left section)
Service range
| Standard Material | |||
| Material codes | Pressure MPa {kgf/㎠} | Max. speed (m/s) |
Temperature
range (℃) |
| NBR(RN807) | - | 1 | ー30～100 |
Characteristics
Metal jacket type of dust seals insertable into groove by press fitting.
Protecting packings and cylinders bypreventing the penetration of dust from the outside.
They are suitable to the conditions where protection from dust, mud, and rain is required.
Protecting packings and cylinders bypreventing the penetration of dust from the outside.
They are suitable to the conditions where protection from dust, mud, and rain is required.
Remarks
- ●Wipers should be installed in the direction specified in the above schematic.
- ●For the way of installation, check Installation Method.
- ●Refer to the ℓ dimension as it would be differed according to the type of packings to be used together.
- ●For ℓ(L) dimensions when using the dust seal alone, please refer to the SKY dimensions.
- ※JIS standard sequence of surface roughness symbols refer to HERE.
Dimension table
| Wipers & Groove dimensions（Unit：mm） | Part No. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| d | D | H | G | C | B | D1 | m | Standard（RN 807） | Retaining ring |
| 8 | 18 | 8 | 5 | 14 | 3 | 18.8±0.1 | 0.7 | SCB-8 | DSP-8 |
| 10 | 20 | 8 | 5 | 16 | 3 | 21 ±0.1 | 0.7 | SCB-10 | DSP-10 |
| 12 | 22 | 8 | 5 | 17 | 3 | 23 ±0.1 | 0.7 | SCB-12-1* | DSP-12 |
| 12.5 | 23 | 8 | 5 | 19 | 3 | 24 ±0.1 | 0.7 | SCB-12.5 | DSP-12.5 |
| 14 | 24 | 8 | 5 | 19 | 3 | 25 ±0.1 | 0.7 | SCB-14 | DSP-14 |
| 15 | 25 | 8 | 5 | 21 | 3 | 26 ±0.1 | 0.7 | SCB-15 | DSP-15 |
| 16 | 26 | 8 | 5 | 21 | 3 | 27 ±0.1 | 0.7 | SCB-16 | DSP-16 |
| 18 | 30 | 9 | 6 | 24 | 3 | 31.5±0.1 | 0.8 | SCB-18 | DSP-18 |
| 20 | 32 | 9 | 6 | 26 | 3 | 33.5±0.1 | 0.8 | SCB-20 | DSP-20 |
| 22 | 32 | 9 | 6 | 28 | 3 | 33.5±0.1 | 0.8 | SCB-22-1* | DSP-20 |
| 22 | 34 | 9 | 6 | 28 | 3 | 35.5±0.1 | 0.8 | SCB-22 | DSP-22 |
| 22.4 | 34.4 | 9 | 6 | 29.4 | 3 | 35.9±0.1 | 0.8 | SCB-22.4 | DSP-22.4 |
| 25 | 37 | 9 | 6 | 31 | 3 | 38.5±0.1 | 0.8 | SCB-25 | DSP-25 |
| 28 | 40 | 9 | 6 | 34 | 3 | 41.5±0.1 | 0.8 | SCB-28 | DSP-28 |
| 30 | 42 | 9 | 6 | 36 | 3 | 43.5±0.1 | 0.8 | SCB-30 | DSP-30 |
| 31.5 | 44 | 10 | 7 | 39 | 3 | 45.5±0.1 | 0.8 | SCB-31.5 | DSP-31.5 |
| 32 | 44 | 10 | 7 | 39 | 3 | 45.5±0.1 | 0.8 | SCB-32 | DSP-32 |
| 34 | 46 | 10 | 7 | 41 | 3 | 47.5±0.1 | 0.8 | SCB-34-1* | DSP-34 |
| 35 | 47 | 10 | 7 | 41 | 3 | 49 ±0.15 | 1 | SCB-35 | DSP-35 |
| 35.5 | 47.5 | 10 | 7 | 42.5 | 3 | 49.5±0.15 | 1 | SCB-35.5 | DSP-35.5 |
| 40 | 52 | 10 | 7 | 46 | 3 | 54 ±0.15 | 1 | SCB-40 | DSP-40 |
| 45 | 57 | 10 | 7 | 51 | 3 | 59 ±0.15 | 1 | SCB-45 | DSP-45 |
| 50 | 62 | 10 | 7 | 56 | 3 | 64 ±0.15 | 1 | SCB-50 | DSP-50 |
| 55 | 69 | 11 | 8 | 62 | 4 | 71.5±0.15 | 1.1 | SCB-55 | DSP-55 |
| 56 | 70 | 11 | 8 | 64 | 4 | 72.5±0.15 | 1.1 | SCB-56 | DSP-56 |
| 60 | 74 | 11 | 8 | 67 | 4 | 76.5±0.15 | 1.1 | SCB-60 | DSP-60 |
| 63 | 77 | 11 | 8 | 71 | 4 | 79.5±0.15 | 1.1 | SCB-63 | DSP-63 |
| 65 | 79 | 11 | 8 | 72 | 4 | 81.5±0.15 | 1.1 | SCB-65 | DSP-65 |
| 70 | 84 | 11 | 8 | 77 | 4 | 86.5±0.15 | 1.1 | SCB-70 | DSP-70 |
| 71 | 85 | 11 | 8 | 79 | 4 | 87.5±0.15 | 1.1 | SCB-71 | DSP-71 |
| 75 | 89 | 11 | 8 | 82 | 4 | 91.5±0.15 | 1.1 | SCB-75 | DSP-75 |
| 78 | 92 | 11 | 8 | 86 | 4 | 94.5±0.15 | 1.1 | SCB-78-1* | DSP-78 |
| 80 | 94 | 11 | 8 | 87 | 4 | 96.5±0.15 | 1.1 | SCB-80 | DSP-80 |
| 85 | 99 | 11 | 8 | 92 | 4 | 101.5±0.15 | 1.1 | SCB-85 | DSP-85 |
| 90 | 104 | 11 | 8 | 97 | 4 | 106.5±0.15 | 1.1 | SCB-90 | DSP-90 |
| 95 | 109 | 11 | 8 | 102 | 4 | 111.5±0.15 | 1.1 | SCB-95 | DSP-95 |
| 98 | 112 | 11 | 8 | 106 | 4 | 114.5±0.15 | 1.1 | SCB-98-1* | DSP-98 |
| 100 | 114 | 11 | 8 | 107 | 4 | 116.5±0.15 | 1.1 | SCB-100 | DSP-100 |
| 105 | 121 | 12 | 9 | 113 | 5 | 125 ±0.15 | 1.3 | SCB-105A | DSP-105A |
| 106 | 120 | 11 | 8 | 114 | 5 | 124 ±0.15 | 1.3 | SCB-106 |
DSP-106 |
| 110 | 126 | 12 | 9 | 118 | 5 | 130 ±0.15 | 1.3 | SCB-110 | DSP-110 |
| 112 | 128 | 12 | 9 | 121 | 5 | 132 ±0.15 | 1.3 | SCB-112 |
DSP-112 |
| 115 | 131 | 12 | 9 | 123 | 5 | 135 ±0.15 | 1.3 | SCB-115 | DSP-115 |
| 118 | 134 | 12 | 9 | 127 | 5 | 138 ±0.15 | 1.3 | SCB-118 | DSP-118 |
| 120 | 136 | 12 | 9 | 128 | 5 | 140 ±0.15 | 1.3 | SCB-120 | DSP-120 |
| 125 | 141 | 12 | 9 | 133 | 5 | 145 ±0.15 | 1.3 | SCB-125 | DSP-125 |
| 130 | 146 | 12 | 9 | 138 | 5 | 150 ±0.15 | 1.3 | SCB-130 | DSP-130 |
| 132 | 148 | 12 | 9 | 141 | 5 | 152 ±0.2 | 1.3 | SCB-132 |
DSP-132 |
| 135 | 155 | 14 | 10 | 145 | 5 | 159 ±0.2 | 1.3 | SCB-135 | DSP-135 |
| 140 | 160 | 14 | 10 | 150 | 5 | 164 ±0.2 | 1.3 | SCB-140 | DSP-140 |
| 145 | 165 | 14 | 10 | 155 | 5 | 169 ±0.2 | 1.3 | SCB-145 | DSP-145 |
| 150 | 170 | 14 | 10 | 160 | 6 | 174 ±0.2 | 1.3 | SCB-150 | DSP-150 |
| 160 | 180 | 14 | 10 | 170 | 6 | 184 ±0.2 | 1.3 | SCB-160 | DSP-160 |
| 170 | 190 | 14 | 10 | 180 | 6 | 194 ±0.2 | 1.3 | SCB-170 | DSP-170 |
| 175 | 195 | 14 | 10 | 185 | 6 | 199 ±0.2 | 1.3 | SCB-175 | DSP-175 |
| 180 | 200 | 14 | 10 | 190 | 6 | 204 ±0.2 | 1.3 | SCB-180 | DSP-180 |
| 190 | 215 | 16 | 12 | 202.5 | 6 | 219.5±0.2 | 1.6 | SCB-190A | DSP-190A |
| 200 | 225 | 16 | 12 | 212.5 | 6 | 229.5±0.2 | 1.6 | SCB-200A | DSP-200A |
| 250 | 274 | 16 | 12 | 262 | 6 | 278.5±0.2 | 1.6 | SCB-250 |
DSP-250 |
- ★Orders and inquiries are acceptable by part numbers. Part numbers marked ※ have been changed each part numbers. Please check HERE for the previous part number.
- ★Part numbers in blue letters are the products in stock.
- ★Wipers with the part numbers in light Italic require the confirmation of their availability prior to ordering. These items are subject to the abolishment without notice. Reclamation of an abolished product requires producing the new tooling at your expense.
- ★Please note that other retaining rings, such as C-shaped retaining rings are not acceptable for the application.
- ★DSP is manufacturable with stainless steel, please inqire of us.
- ★Wipers are adequately packaged for the optimum storage. Refer to Cautions for the handling and storage.
- ★Performance and material tests on packing and seals are also available. Please contact us for more information.
Technical information
TECHNICAL INFORMATION