Profiles (Left section)
Service range
| Standard material | |||
| Material codes | Pressure MPa {kgf/㎠} | Max. speed (m/s) |
Temperature
range (℃) |
| Fabric reinforced polyester resin | - | 3 | ー55～120 |
Characteristics
SWO-Wear rings are fabric reinforced phenolic wear rings providing exellent resistance against pressing load and eliminates stick-slip.
SWO-Wear rings are installable in one piece groove and prevent metal seizing and/or deterioration of metal surface.
SWO-Wear rings are installable in one piece groove and prevent metal seizing and/or deterioration of metal surface.
Remarks
- ●Dimension L refers to the groove dimension of packings in the seal systems.
- ※JIS standard sequence of surface roughness symbols refer to HERE.
Dimension table
| Wear ring & Groove dimensions （Unit：mm） | Part No. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| D | d | H | t | G | D1 | D2 | L | Standard material（PB 271） | |
| 32 | 27 | 0 -0.05 |
5.5 | 2.5 | 5.6 | 31.5 | 31 | 2 | SWO-32 |
| 40 | 35 | 5.5 | 2.5 | 5.6 | 39.5 | 39 | 2 | SWO-40 | |
| 50 | 45 | 5.5 | 2.5 | 5.6 | 49.5 | 49 | 2.5 | SWO-50 | |
| 63 | 58 | 5.5 | 2.5 | 5.6 | 62.4 | 62 | 2.5 | SWO-63 | |
| 80 | 75 | 5.5 | 2.5 | 5.6 | 79.4 | 79 | 2.5 | SWO-80 | |
| 100 | 95 | 5.5 | 2.5 | 5.6 | 99.4 | 99 | 2.5 | SWO-100 | |
| 125 | 120 | 0 -0.08 |
5.5 | 2.5 | 5.6 | 124.3 | 124 | 4 | SWO-125 |
- ★Orders and inquiries are acceptable by part numbers. Part numbers marked ※ have been changed each part numbers. Please check HERE for the previous part number.
- ★Part numbers in blue letters are the products in stock.
- ★Wear rings with the part numbers in light Italic require the confirmation of their availability prior to ordering. These items are subject to the abolishment without notice.
- ★Wear rings are adequately packaged for the optimum storage. Refer to Cautions for the handling and storage.
- ★Performance and material tests on packing and seals are also available. Please contact us for more information.
Technical information
TECHNICAL INFORMATION