Service range
Standard material | |||
Material codes | Pressure MPa {kgf/㎠} | Max. speed (m/s) |
Temperature
range (℃) |
S-KID rubber(RK703) FKM[RF905] |
1 {10} | 1 | ー25~70 [ー5~150] |
Material codes・The range with [ ] refers FKM materials
Characteristics
GLY packing are pneumatic packings for both pistons and rods.
Standard material type of slit design improves stable sealing.
Standard material type of slit design improves stable sealing.
Remarks
- ●Packings should be installed in the direction specified on the above schematic.
- ●Consider adopting split grooves if one-piece groove is technically adverse.
- ●φD H9/f8 would be modified according to the variation of the bearing structure. For applications installed in combination with wear rings, refer to the dimension table of the applicable wear rings.
- GLY-Z-Packing(RK703) is a replacement of GLY-Packing(RK701) with a slight change of its shape, has been released since April 2020. GLY-Packing for high temperature-resistant(RF905) has no change of its shape.
- ※ JIS standard sequence of surface roughness symbols refer to HERE.
Dimension table
Packings & Groove dimensions(Unit:mm) | Part No. | ||||||||
---|---|---|---|---|---|---|---|---|---|
GLY-Z | GLY | ||||||||
d | D | H1 (RK703) |
H2 (RF905) |
G | D1 | L | Standard (RK703) |
High temperature-resistant (RF905) |
|
10 | 18 | 5.2 | 5.7 | 17.1 | 3 | 1.5 | GLY-10 Z | ||
12 | 20 | 5.2 | 5.7 | 19.1 | 3 | 1.5 | GLY-12 Z | ||
14 | 22 | 5.2 | 5.7 | 21.1 | 3 | 1.5 | GLY-14 Z | ||
16 | 24 | 5.2 | 5.7 | 23.1 | 3 | 1.5 | GLY-16 Z | ||
17 | 25 | 5.2 | 5.7 | 24.1 | 3 | 1.5 | GLY-17 Z | ||
18 | 26 | 5.2 | 5.7 | 25.1 | 3 | 1.5 | GLY-18 Z | ||
20 | 28 | 5.2 | 5 | 5.7 | 27.1 | 3 | 1.5 | GLY-20 Z | GLY-20 F |
22.4 | 30 | 5.2 | 5 | 5.7 | 29.1 | 3 | 1.5 | GLY-22.4 Z | GLY-22.4 F |
25 | 33 | 5.2 | 5 | 5.7 | 32.1 | 3 | 1.5 | GLY-25 Z | GLY-25 F |
27 | 35 | 5.2 | 5.7 | 34.1 | 3 | 1.5 | GLY-27 Z | ||
28 | 36 | 5.2 | 5.7 | 35.1 | 3 | 1.5 | GLY-28 Z | ||
30 | 40 | 6.5 | 6 | 7 | 39 | 3 | 3 | GLY-30 Z | GLY-30 F |
31.5 | 41.5 | 6.5 | 7 | 40.5 | 3 | 3 | GLY-31.5 Z | ||
32 | 42 | 6.5 | 7 | 41 | 3 | 3 | GLY-32 Z | ||
35 | 45 | 6.5 | 7 | 44 | 3 | 3 | GLY-35 Z | ||
35.5 | 45.5 | 6.5 | 7 | 44.5 | 3 | 3 | GLY-35.5 Z | ||
36 | 46 | 6.5 | 6 | 7 | 45 | 3 | 3 | GLY-36 Z | GLY-36 F |
40 | 50 | 6.5 | 6 | 7 | 49 | 3 | 3 | GLY-40 Z | GLY-40 F |
45 | 55 | 6.5 | 6 | 7 | 54 | 3 | 3 | GLY-45 Z | GLY-45 F |
50 | 60 | 6.5 | 6 | 7 | 59 | 3 | 3 | GLY-50 Z | GLY-50 F |
53 | 63 | 6.5 | 6 | 7 | 62 | 3 | 3 | GLY-53 Z | GLY-53 F |
55 | 65 | 6.5 | 7 | 64 | 3 | 3 | GLY-55 Z | ||
60 | 70 | 6.5 | 6 | 7 | 69 | 3 | 3 | GLY-60 Z | GLY-60 F |
63 | 73 | 6.5 | 7 | 72 | 3 | 3 | GLY-63 Z | ||
65 | 75 | 6.5 | 7 | 74 | 3 | 3 | GLY-65 Z | ||
70 | 80 | 6.5 | 6 | 7 | 79 | 3 | 3 | GLY-70 Z | GLY-70 F |
75 | 85 | 6.5 | 7 | 84 | 3 | 3 | GLY-75 Z | ||
80 | 90 | 6.5 | 7 | 89 | 3 | 3 | GLY-80 Z | ||
85 | 95 | 6.5 | 7 | 94 | 4 | 4 | GLY-85 AZ | ||
85 | 100 | 9.5 | 10 | 98.5 | 4 | 4 | GLY-85 Z | ||
90 | 105 | 9.5 | 10 | 103.5 | 4 | 4 | GLY-90 Z | ||
95 | 110 | 9.5 | 10 | 108.5 | 4 | 4 | GLY-95 Z | ||
100 | 115 | 9.5 | 9 | 10 | 113.5 | 4 | 4 | GLY-100 Z | GLY-100-1F* |
105 | 120 | 9.5 | 10 | 118.5 | 4 | 4 | GLY-105 Z | ||
110 | 125 | 9.5 | 9 | 10 | 123.5 | 4 | 4 | GLY-110 Z | GLY-110 F |
115 | 130 | 9.5 | 10 | 128.5 | 4 | 4 | GLY-115 Z | ||
125 | 140 | 9.5 | 10 | 138.5 | 4 | 4 | GLY-125 Z | ||
135 | 150 | 9.5 | 10 | 148.5 | 4 | 4 | GLY-135 Z | ||
145 | 160 | 9.5 | 9 | 10 | 158.5 | 4 | 4 | GLY-145 Z | GLY-145 F |
160 | 175 | 9.5 | 10 | 173.5 | 4 | 4 | GLY-160 Z | ||
165 | 180 | 9.5 | 10 | 178.5 | 4 | 4 | GLY-165 Z | ||
175 | 190 | 9.5 | 10 | 188.5 | 4 | 4 | GLY-175 Z | ||
180 | 200 | 12 | 12 | 13 | 198 | 5 | 5 | GLY-180 Z | GLY-180 F |
185 | 205 | 12 | 13 | 203 | 5 | 5 | GLY-185 Z | ||
195 | 215 | 12 | 13 | 213 | 5 | 5 | GLY-195 Z | ||
200 | 220 | 12 | 13 | 218 | 5 | 5 | GLY-200 Z | ||
210 | 230 | 12 | 13 | 228 | 5 | 5 | GLY-210 Z | ||
215 | 235 | 12 | 13 | 233 | 5 | 5 | GLY-215 Z | ||
230 | 250 | 12 | 12 | 13 | 248 | 5 | 5 | GLY-230 Z | GLY-230 F |
235 | 255 | 12 | 13 | 253 | 5 | 5 | GLY-235 Z | ||
240 | 260 | 12 | 13 | 258 | 5 | 5 | GLY-240 Z |
- ★Orders and inquiries are acceptable by part numbers. Part numbers marked ※ have been changed each part numbers. Please check HERE for the previous part number.
- ★Part numbers in blue letters are the products in stock.
- ★Packings with the part numbers in light Italic require the confirmation of their availability prior to ordering. These items are subject to the abolishment without notice. Reclamation of an abolished product requires producing the new tooling at your expense.
- ★Packings are adequately packaged for the optimum storage. Refer to Cautions for the handling and storage.
- ★Performance and material tests on packing and seals are also available. Please contact us for more information.