Profiles (Left section)
Service range
| Standard Material | |||
| Material codes | Pressure MPa {kgf/㎠} | Max. speed (m/s) |
Temperature
range (℃) |
| NBR(RN912) FKM(RF905) |
1 | 1 | ー30～100 （ー5～150） |
Material codes・The range with [ ] refers FKM materials
Characteristics
Low friction type for pneumatic cylinders of indoor applications.
Protecting packings and cylinders bypreventing the penetration of dust from the outside.
Seals applicable to cylinders for indoor use are suitable for room atmosphere only.
Avoid adopting these seats to heavy duty applications.
Protecting packings and cylinders bypreventing the penetration of dust from the outside.
Seals applicable to cylinders for indoor use are suitable for room atmosphere only.
Avoid adopting these seats to heavy duty applications.
Remarks
- ●Wipers should be installed in the direction specified in the above schematic.
- ●Consider adopting divided grooves if one-piece groove is technically adverse.
- ●Refer to the ℓ dimension as it would be differed according to the type of packings to be used together.
- ●Seals applicable to cylinders for indoor use are suitable for room atmosphere only. Avoid adopting these seats to heavy duty applications.
- ●For ℓ(L) dimensions when using the dust seal alone, please refer to the SKY dimensions.
- ※JIS standard sequence of surface roughness symbols refer toHERE.
Dimension table
| Wipers & Groove dimensions（Unit：mm） | Part No. | |||||||
|---|---|---|---|---|---|---|---|---|
| d | D | H | t | G | C | B | Standard（RN 912） | High temperature-resistant（RF 905） |
| 16 | 24 | 6 | 4.5 | 5 | 20.3 | 2 | SFR-16K | |
| 18 | 26 | 6 | 4.5 | 5 | 22.3 | 2 | SFR-18K | |
| 20 | 28 | 6 | 4.5 | 5 | 24.3 | 2 | SFR-20K | |
| 22 | 30 | 6 | 4.5 | 5 | 26.3 | 2 | SFR-22K | |
| 22.4 | 30.4 | 6 | 4.5 | 5 | 26.7 | 2 | SFR-22.4K | |
| 25 | 33 | 6 | 4.5 | 5 | 29.3 | 2 | SFR-25K | |
| 28 | 36 | 6 | 4.5 | 5 | 32.3 | 2 | SFR-28K | |
| 30 | 38 | 6.5 | 5 | 6 | 34 | 2 | SFR-30K | SFR-30F |
| 31.5 | 39.5 | 6.5 | 5 | 6 | 35.5 | 2 | SFR-31.5K | |
| 32 | 40 | 6.5 | 5 | 6 | 36 | 2 | SFR-32K | |
| 35 | 43 | 6.5 | 5 | 6 | 39 | 2 | SFR-35K | |
| 35.5 | 43.5 | 6.5 | 5 | 6 | 39.5 | 2 | SFR-35.5K | |
| 36 | 44 | 6.5 | 5 | 6 | 40 | 2 | SFR-36K | SFR-36F |
| 40 | 48 | 6.5 | 5 | 6 | 44 | 2 | SFR-40K | |
| 45 | 53 | 6.5 | 5 | 6 | 49 | 2 | SFR-45K | |
| 50 | 58 | 6.5 | 5 | 6 | 54 | 2 | SFR-50K | |
| 55 | 63 | 6.5 | 5 | 6 | 59 | 2 | SFR-55K | |
| 60 | 68 | 6.5 | 5 | 6 | 64 | 2 | SFR-60K | |
| 63 | 71 | 6.5 | 5 | 6 | 67 | 2 | SFR-63K | |
| 70 | 80 | 8 | 6 | 7 | 75 | 3 | SFR-70K | |
| 75 | 85 | 8 | 6 | 7 | 80 | 3 | SFR-75K | |
| 80 | 90 | 8 | 6 | 7 | 85 | 3 | SFR-80K | |
- ★Orders and inquiries are acceptable by part numbers. Part numbers marked ※ have been changed each part numbers. Please check HERE for the previous part number.
- ★Part numbers in blue letters are the products in stock.
- ★Wipers with the part numbers in light Italic require the confirmation of their availability prior to ordering. These items are subject to the abolishment without notice. Reclamation of an abolished product requires producing the new tooling at your expense.
- ★Wipers are adequately packaged for the optimum storage. Refer to Cautions for the handling and storage.
- ★Performance and material tests on packing and seals are also available. Please contact us for more information.
Technical information
TECHNICAL INFORMATION