Service range
Standard Material | |||
Material codes | Pressure MPa {kgf/㎠} | Max. speed (m/s) |
Temperature
range (℃) |
NBR(RN729) FKM[RF704] |
1 {10} | 1 | ー20~80 [ー5~150] |
Material codes・The range with [ ] refers FKM materials
Characteristics
PPY-Packings are high wear resistant piston packings for miniature cylinders. Higher durability and desirable friction properties are obtainable comparing with O-rings.
Remarks
- ●The material of PPY packing has changed from NBR (RN713) to NBR (RN729), but other materials are also available. Please contact us individually.
- ●Packings should be installed in the direction specified on the above schematic.
- ●Consider adopting split grooves if one-piece groove is technically adverse.
- ●φD H9/f8 would be modified according to the variation of the bearing structure. For applications installed in combination with wear rings, refer to the dimension table of the applicable wear rings.
- ※JIS standard sequence of surface roughness symbols refer to HERE.
Dimension table
Packings & Groove dimensions(Unit:mm) | Part No. | ||||||
---|---|---|---|---|---|---|---|
D | d | H | D1 | G | L | Standard (RN 729) |
High temperature-resistant (RF 704) |
6 | 3 | 2.2 | 5.5 | 2.6 | 2.5 | PPY- 6K | PPY- 6F |
8 | 4 | 2.9 | 7.5 | 3.3 | 2.5 | PPY- 8K | |
10 | 6 | 2.9 | 9.5 | 3.3 | 2.5 | PPY-10K | PPY-10F |
12 | 8 | 2.9 | 11.5 | 3.3 | 2.5 | PPY-12K | |
15 | 10 | 3.6 | 14 | 4 | 2.5 | PPY-15K | PPY-15F |
16 | 11 | 3.6 | 15 | 4 | 2.5 | PPY-16K | |
20 | 14 | 4.3 | 19 | 4.7 | 3 | PPY-20K | |
25 | 17 | 5.3 | 24 | 5.7 | 3 | PPY-25K | |
32 | 24 | 5.3 | 31 | 5.7 | 3 | PPY-32K | |
40 | 30 | 6.5 | 39 | 7 | 3 | PPY-40K |
- ★Orders and inquiries are acceptable by part numbers. Part numbers marked ※ have been changed each part numbers. Please check HERE for the previous part number.
- ★Part numbers in blue letters are the products in stock.
- ★Packings with the part numbers in light Italic require the confirmation of their availability prior to ordering. These items are subject to the abolishment without notice. Reclamation of an abolished product requires producing the new tooling at your expense.
- ★PPY-6 does not have slit on the inner diameter.
- ★SWB-Wear rings is recommended to be combined for cylinders of φ20 and larger sizes.
- ★Packings are adequately packaged for the optimum storage. Refer to Cautions for the handling and storage.
- ★Performance and material tests on packing and seals are also available. Please contact us for more information.