Profiles (Left section)
Service range
| Standard Material | ||||
| Material codes | Pressure MPa {kgf/㎠} | Max. speed (m/s) |
Temperature range (℃) |
|
| NBR(RN809) | w/Back-up rings | 21 {210} | 0.5 | ー45～100 |
Characteristics
ⓉSNY-rod packings are interchangeable with SKY-Packings.
Broad service temperature range of -45℃ to +100℃ allows cylinders for use in international cold environments without changing packings.
They also feature exceptionally low stick-slip.
High pressure and/or high frequency conditions should be avoided due to the material RN812, moderately low in rubber hardness.
Broad service temperature range of -45℃ to +100℃ allows cylinders for use in international cold environments without changing packings.
They also feature exceptionally low stick-slip.
High pressure and/or high frequency conditions should be avoided due to the material RN812, moderately low in rubber hardness.
Remarks
- ●Packings should be installed in the direction specified on the above schematic.
- ●Consider adopting split grooves if one-piece groove is technically adverse.
- ●Split grooves are recommended for SNY-18 and smaller products.
- ※For applications without back-up rings, refer to the limiting curve of extrusion of seals for size （φd2）
- ※JIS standard sequence of surface roughness symbols refer to HERE.
Dimension table
| Packings & Groove dimensions (Unit：mm） | Part No. | |||||||
|---|---|---|---|---|---|---|---|---|
| d | D | H | GA | GB | d1(Reference) |  |
Standard material （RN809） |
Standard back-up ring （PT111） |
| 14 | 22 | 5 | 5.7 | 6.7 | 14.4 | 2.5 | ⓉSNY-14 | TCS-22×14 |
| 18 | 26 | 5 | 5.7 | 6.7 | 18.4 | 2.5 | ⓉSNY-18 | TCS-26×18 |
| 20 | 28 | 5 | 5.7 | 6.7 | 20.4 | 2.5 | ⓉSNY-20 | TCS-28×20 |
| 25 | 33 | 5 | 5.7 | 6.7 | 25.4 | 2.5 | ⓉSNY-25 | TCS-33×25 |
| 28 | 35.5 | 5 | 5.7 | 6.7 | 28.4 | 2.5 | ⓉSNY-28 | TCS-35.5×28 |
| 30 | 40 | 6 | 7 | 8.5 | 30.5 | 3 | ⓉSNY-30 | TCS-40×30 |
| 31.5 | 41.5 | 6 | 7 | 8.5 | 32 | 3 | ⓉSNY-31.5 | TCS-41.5×31.5 |
| 35 | 45 | 6 | 7 | 8.5 | 35.5 | 3 | ⓉSNY-35 | TCS-45×35 |
| 35.5 | 45 | 6 | 7 | 8.5 | 36 | 3 | ⓉSNY-35.5 | TCS-45×35.5 |
| 40 | 50 | 6 | 7 | 8.5 | 40.5 | 3 | ⓉSNY-40 | TCS-50×40 |
| 45 | 55 | 6 | 7 | 8.5 | 45.5 | 3 | ⓉSNY-45 | TCS-55×45 |
| 45 | 56 | 7 | 8 | 9.5 | 45.5 | 3 | ⓉSNY-45A | TCS-56×45 |
| 50 | 60 | 6 | 7 | 8.5 | 50.5 | 3 | ⓉSNY-50 | TCS-60×50 |
| 55 | 65 | 6 | 7 | 8.5 | 55.6 | 3 | ⓉSNY-55 | TCS-65×55 |
| 56 | 66 | 6 | 7 | 8.5 | 56.6 | 3 | ⓉSNY-56 | TCS-66×56 |
| 60 | 70 | 6 | 7 | 8.5 | 60.6 | 3 | ⓉSNY-60 | TCS-70×60 |
| 60 | 71 | 7 | 8 | 9.5 | 60.6 | 3 | ⓉSNY-60A | TCS-71×60 |
| 63 | 73 | 6 | 7 | 8.5 | 63.6 | 3 | ⓉSNY-63 | TCS-73×63 |
| 65 | 75 | 6 | 7 | 8.5 | 65.6 | 3 | ⓉSNY-65 | TCS-75×65 |
| 70 | 85 | 9 | 10 | 12 | 70.6 | 4 | ⓉSNY-70A | TCS-85×70 |
| 70 | 80 | 6 | 7 | 8.5 | 70.6 | 4 | ⓉSNY-70C | TCS-80×70 |
| 75 | 85 | 6 | 7 | 8.5 | 75.6 | 4 | ⓉSNY-75 | TCS-85×75 |
| 75 | 90 | 9 | 10 | 12 | 75.6 | 4 | ⓉSNY-75A | TCS-90×75 |
| 80 | 95 | 9 | 10 | 12 | 80.6 | 4 | ⓉSNY-80A | TCS-95×80 |
| 80 | 90 | 6 | 7 | 8.5 | 80.6 | 4 | ⓉSNY-80C | TCS-90×80 |
| 85 | 100 | 9 | 10 | 12 | 85.6 | 4 | ⓉSNY-85 | TCS-100×85 |
| 85 | 95 | 6 | 7 | 8.5 | 85.6 | 4 | ⓉSNY-85C | TCS-95×85 |
| 90 | 105 | 9 | 10 | 12 | 90.6 | 4 | ⓉSNY-90 | TCS-105×90 |
| 95 | 110 | 9 | 10 | 12 | 95.6 | 4 | ⓉSNY-95 | TCS-110×95 |
| 100 | 115 | 9 | 10 | 12 | 100.6 | 4 | ⓉSNY-100 | TCS-115×100 |
| 105 | 120 | 9 | 10 | 12 | 105.6 | 4 | ⓉSNY-105 | TBC-105-1* |
| 110 | 125 | 9 | 10 | 12 | 110.6 | 4 | ⓉSNY-110 | TCS-125×110 |
| 115 | 130 | 8.5 | 9.5 | 11.5 | 115.6 | 4 | ⓉSNY-115B | TBC-115-2* |
| 125 | 140 | 9 | 10 | 12 | 125.7 | 4 | ⓉSNY-125 | TCS-140×125 |
| 140 | 155 | 9 | 10 | 12 | 140.7 | 4 | ⓉSNY-140 | TCS-155×140 |
| 150 | 165 | 9 | 10 | 12 | 150.7 | 4 | ⓉSNY-150 | TCS-165×150 |
| 160 | 175 | 9 | 10 | 12 | 160.7 | 4 | ⓉSNY-160 | TCS-175×160 |
| 180 | 200 | 12 | 13 | 15.5 | 180.7 | 5.5 | ⓉSNY-180 | TCS-200×180 |
- ★Orders and inquiries are acceptable by part numbers. Part numbers marked ※ have been changed each part numbers. Please check HERE for the previous part number.
- ★Part numbers in blue letters are the products in stock.
- ★Packings with the part numbers in light Italic require the confirmation of their availability prior to ordering. These items are subject to the abolishment without notice. Reclamation of an abolished product requires producing the new tooling at your expense.
- ★Packings are adequately packaged for the optimum storage. Refer to Cautions for the handling and storage.
- ★Performance and material tests on packing and seals are also available. Please contact us for more information.
| Profiles (Left section) | Standard Material | Part Name | Application | Field of application |
|---|---|---|---|---|
 |
NBR(RN812) | ⓉSGY-Packings | （Piston packings） | |
 |
NBR(RN906) | SDR-Wipers | （Rod packings） | |
 |
NBR(RN814) | SCK-Wipers | （Rod packings） | |
 |
NBR(RN807) | SCB-Wipers | （Rod packings） | |
 |
PTFE(PT111) | PG-Rings (PGRI) | （Rod packings） |
Technical information
TECHNICAL INFORMATION