Product name
[Application] |
Profiles
(Left section) |
Material codes |
Characteristics |
Field of application |
SCK-Wipers
[Rod wipers] |
 |
RN814 |
Wipers protect packings and cylinders by preventing the penetration of dust from the outside.
# SCK-wipers: Insertable dust seals with a large profile for both outdoor and indoor applications.
They are specially designed to prevent water penetration through the outer circuit of the groove.
# SDR-wipers: Common dust seals insertable in cylinders for indoor applications.
# SDB-wipers: Dust seals with rubber coated metal jacket placed on the outer circuit. Specially designed for the prevention of penetration of operating fluids.
# SCB-wipers: Metal jacket type insertable in the groove by press fitting. They are suitable to the conditions where protection from dust, mud, and rain is required.
# SER-wipers: Insertable dust seals with a small profile for miniature cylinders of indoor applications.
# SFR-wipers: Low friction type for pneumatic cylinders of indoor applications. |
# Cylinders for construction and industrial vehicles
# Cylinders for machine tools
# Cylinders for agricultural machines |
SDR-Wipers
[Rod wipers] |
 |
RN906
(RF905) |
# Hydraulic and pneumatic cylinders
# Low pressure and hydro-pneumatic cylinders |
SDB-Wipers
[Rod wipers] |
 |
RN819
(RF903)
|
# Cylinders for machine tools
# Cylinders for special applications |
SCB-Wipers
[Rod wipers] |
 |
RN807
|
# Basic cylinders
# Cylinders for construction and industrial vehicles
# Cylinders for agricultural machines
# Cylinders for marine vessels |
SER-Wipers
[Rod wipers] |
 |
RN906
(RF905) |
# Miniature hydraulic cylinders
# Miniature pneumatic cylinders |
SFR-Wipers
[Rod wipers] |
 |
RN912
|
# Basic pneumatic cylinders |
| SW-Wear Rings [Piston wear rings] |
 |
PB201 |
Wear rings for pistons. Fabric reinforced phenolic resin structure provides excellent resistance against pressing load. Installable in one piece groove and inhibit a metal seizing and/or a deterioration of metal surface.
# SW-wear rings are applied to the wide range of hydraulic cylinders.
# SWA-wear rings are designed for low pressure hydraulic cylinders and pneumatic cylinders.
# SWB-wear rings are applicable to pneumatic cylinders. |
# Basic hydraulic cylinders
# Cylinders for construction and industrial vehicles |
SWA-Wear Rings
[Piston wear rings] |
 |
PB201 |
# Basic pneumatic cylinders
# Low pressure hydraulic cylinders
# Hydro-pneumatic cylinders |
SWB-Wear Rings
[Piston wear rings] |
 |
PB251 |
S-LEEVE
(WPB type)
[Piston bearings] |
 |
PN104 |
WPB & WRB-bearings provide multi-functions of bearing plus back-up ring, installable in one piece grooves in combination with the packings compatible with the grooves of the SKY-packings.
WPB & WRB-bearings inhibit metal seizing and eccentric movement of piston and/or rod and greatly improve pressure resistance and durability of the SKY-packings.
For those applications higher dimensional precision is required, SW-wear rings are recommended. |
# Basic hydraulic cylinders
# Cylinders for industrial vehicles
# Cylinders for machine tools |
S-LEEVE
(WRB type)
[Rod bearings] |
 |
PN104 |
| PWL-Bearings [Piston bearings] |
 |
PN104 |
PWL-plastic bearings provide multi-functions of bearing plus back-up ring, installable in one piece grooves in combination with the RGU-packings.
PWL-bearings inhibit seizing of piston metals and greatly improve pressure resistance and durability of the RGU- packings.
PWL-bearings can be combined with most of HSD-packings to improve pressure resistance and durability of HSD-packings. |
# Cylinders for agricultural machines
# Cylinders for machine tools and industrial vehicles
# Cylinders for small mini constraction machines |
| PCS-Cushion Seals |
 |
RN803
(RF903) |
PCS-cushion seals in common pneumatic cylinders prevent breakage and impact noise by absorbing shock at stroke end.
Unlike other cushion systems, PCS-cushion seals eliminate check-valve that provides unignorable advantage in maintenance. |
# Basic pneumatic cylinders |
